Types of TILE ADHESIVES AND TILE GROUTS
* POLYALK TF: Bonding agent for fixing all types of tiles
POLYALK TF can be easily mixed with white or grey cement
The matrix is watertight and has additional flexural and tensile properties
Tiles can be fixed on either dry or wet surfaces without any loss of bond strength
Fallen tiles may be re-fixed without disturbing the adjoining tiles
* POLYALK TA: Polymer-modified cementitious tile adhesive application
Conforms to BS 5980 –1980
Ready to use; only add water at the site
It can be applied directly on the substrate or tile in a single layer ranging in thickness from 3mm onwards
Excellent slip resistance and good open time
Minimum shrinkage and no curing are required
* POLYALK TG: Cementitious tile grout
Ready-to-use, just add water on site
Fills joints up to 6 mm wide
Crack-resistant
Excellent adhesion and water impermeability
Good open time
Non-shrinkage
Available in tile-matching colours